The transportation of mobile crusher and fixed crusher is completely different. The mobile crusher used to finish the equipment at the maximum level when leaving the factory. Only the discharging belt is required to be fixed when arriving at the site. So the transportation is three super transportation! So what should we do? Zhiguang mobile crusher rental for you to explain:
Mobile crusher rental
1. Before long-distance transportation, the accessories on the equipment shall be removed and shipped separately. The moving parts on the equipment shall be fixed and locked to avoid shaking, impact and vibration when driving at high speed.
2. When the size of the equipment is large and exceeds the transportation rules of the transportation department, the transportation plan shall be carefully designed and the transportation road shall be drawn up together with the transportation department.
3. Before formal shipment, complete inspection shall be stopped for walking installation. In particular, towing, brake light parts, we must make a strict inspection, in order to avoid the occurrence of safety accidents.
4. After the preparatory work is completed, put up the legs and stop the shipment.
5. When the equipment is transferred at small intervals on the construction site, the preparatory work is relatively simple. It is only necessary to check the walking and installation, then put up the legs, and stop the shipment with the bulldozer and other machines with large traction.
6. During transportation, the speed of the equipment shall not be too high. For large equipment, obvious signs shall be set up and special personnel shall be assigned for safety. When transferring within the construction site, pay attention to the road conditions, especially the cross slope should not be too large to avoid instability.
It's especially flustered to do a good job in handling large equipment. So, how to handle large equipment?
I. safe transportation
Safety is the most important thing in the process of handling large equipment, so road safety should be put in the first place. First of all, choose the transport vehicle without any safety title, and load the equipment on the premise of ensuring the safety of the equipment. Then, it is sure to check whether there are any defects in the installation and fixation repeatedly after loading, so as to ensure that the equipment will not slide in the middle of transportation. Finally, the field test road, for example, transport bridge, then to determine the load-bearing capacity of the bridge. How can we try our best to prevent traffic accidents in the process of transportation.
II. Safety of equipment
Every part of the equipment has its own needs. Therefore, in the process of large-scale equipment handling, the safety of large-scale equipment itself is also very flustered. Transport carefully and do not damage the equipment. When loading, be sure to be alert and take serious measures to prevent wear and bump. In the transportation, try to drive the transport vehicle smoothly and safely, how can we prevent the collision loss between the vehicle and the equipment in the transportation. In addition, soft articles can be used to wrap the equipment during handling to prevent collision. When personnel move the equipment or crane, it is more stable. To prevent failure and success, make headlines at the last minute.
III. selection of transportation company
The transportation company is also one of the protagonists in the handling of large equipment. Although there is no need to think about peace, this should be the first thing to do well. Find a transportation company to transport, the quality of the company's employees will not be poor. Using the high-quality staff, we not only get the safety guarantee of transportation, but also prevent the equipment of the client from showing a large amount of loss. During the period of the transportation company, a good Tianjin moving company will carefully take care of the equipment for the client, and will not bear the expectations of the client alone, nor will it cause losses to all parties.
IV. detailed planning and design
Large equipment handling is not a walk away tour. To reduce transportation risk, a detailed relocation plan is essential. The design of the plan must be considered thoroughly, including transportation road, vehicle use, personnel distribution and equipment placement. Before the equipment stops transportation, stop the transportation road investigation of Zibo network company to ensure the safety and refinement of the plan. Although planning and design will cost time, but compared with the economic loss of equipment damage, taking time will have greater benefits. Therefore, it is necessary to design a transportation plan carefully.
Large equipment handling is not only a physical work, but also a mental work that needs to be considered carefully. If you want to do a good job in the transportation of large-scale equipment, you need to think carefully, and every detail cannot be sloppy. We need to know that the equipment has a great connection with the company's economic development, so the transportation work can be serious and serious again!
厂家为大家做的相关介绍，想要了解更多内容，欢迎访问网站：http://www.danricelaw.comThe above is the introduction of mobile lithotripter rental manufacturer for you. To learn more, please visit the website: http://www.danricelaw.com