The gravel crusher plays an increasingly important role in mining development and garbage disposal. Today, the rental of mobile gravel crusher summarizes the internal components of the gravel crusher, hoping to help you all!
The crusher consists of a roller, a roller supporting bearing, a compression and adjustment device and a driver. Adjust the discharge size of the gravel crusher: install a wedge or washer between the two hammers, and install a regulating bolt at the top of the wedge.
When the hammer head is used to cut the cushion, when the adjusting bolt pulls up the wedge, the wedge-shaped hammer head is separated from the fixed wheel, that is, the gap between the two hammers becomes larger, and the discharge particle size becomes larger. When the wedge is downward, the gap between the two hammers decreases under the influence of the compression spring, and the discharge particle size decreases.
By adjusting the number or thickness of gaskets to install gaskets to adjust the size of discharge. When gaskets are added, the gap between the two hammers becomes larger. When the gasket is cut, the clearance between the two hammers decreases and the discharge diameter decreases.
The driving mechanism of the gravel crusher consists of two electric motors, which are driven by V-belt to pulley and dragged by hammer head and distorted according to the object of the subject. When the sheet is winded, the gap between the two hammers becomes smaller. When the material breaks, the material passes through the hammer head from the feed port and is crushed by rolling.
The wonderful content of this article is compiled by the small edition of mobile lithotripter leasing. Our company insists on the win-win concept of honesty and cooperation to provide you with perfect service. Welcome to http://www.danricelaw.com.