In the production line of mineral resources, the counterattack crusher is an important equipment, and its operation status is closely related to the benefit. Many bosses actually pay more attention to the value of the crusher, but do not pay attention to the cleanliness of the crusher. This is the crushing of materials, in the process of crushing materials will be mixed with dust and non-fragile materials. Therefore, it is necessary to clean the crusher. What should we pay attention to when cleaning? Next, let's take a look at the small braider leased by the counterattack crusher.
The cleaning of the counter-impact crusher first leaves some materials in the pre-operation of the inlet and outlet ports. If the material is not cleaned, the next step may affect the quality of the product.
In addition to the inlet and outlet, the bearing of the equipment should also be cleaned. If the bearing has adhesion force, the heat dissipation of the bearing will be affected. The heat dissipation effect will deteriorate, which will increase the bearing temperature and affect the service life and performance of the equipment. If it is caused by accidents and safety problems, if accessories are found on bearings, they should be cleaned up in time. Fine sand attachments are the same to ensure the smooth and stable operation of bearings.
V-belt should also be checked and cleaned. No dirt or dust will be left on V-belt. The stain and dust of V-belt will increase the wear and tear of V-belt and shorten the service life of equipment. It should be cleaned and maintained as soon as possible.
The cavity of impact crusher should also be cleaned. Before starting the machine, please check carefully whether there is any material in the crusher chamber. This can reduce the load of crusher. Load operation still has a great impact on equipment. Mask gloves should be equipped during cleaning to avoid inhalation of dust.
The cleaning of counterattack crusher requires a special person to be responsible for the arrangement of equipment cleaning, and to be carried out in a planned and gradual manner. When cleaning the crusher, the crusher should be shut down first, and the crusher should be cleaned with towels and other plots. After cleaning the material inside the equipment, the crushing chamber can be closed. The external cleaning of the equipment is mainly the surface layer. Clean and clean the ground, these cleaning work is mainly to prevent the equipment in use of paper jam phenomenon, to ensure the smooth working process of the equipment.
I'm going to talk to you for a moment today. I hope this little Tidy-up knowledge from the counterattack crusher rental can help you. If you have any questions about this, please consult our official for details. Http://www.danricelaw.com