Before starting the crusher, we should carry out a comprehensive inspection of the equipment. The inspection items are very complicated. Let's introduce it to us in detail by the retaliation crusher rental manufacturer.
1. Wear condition of gear plate.
2. Adjust the size of the drainage outlet.
3. Check whether there are ores in the crushing chamber. If there are large ores, they must be removed.
4. Check whether the connecting bolt is loose, the protective cover of the belt pulley and flywheel is intact. If 30% of the belt is seriously damaged, it is necessary to replace all the new triangle belts, not mix the old with the new ones, so as to avoid reducing power and affecting production efficiency.
5. Whether the degree of elasticity of triangular belt and tie rod spring is appropriate.
6. Full degree of tank oil and intact condition of lubrication system.
7. Whether the top or lifting screw of hydraulic jacking machine is retracted, and whether the adjustment gasket is installed correctly and pressed tightly.
8. Whether the electrical equipment and signal system are normal or not.
The above wonderful content is obtained from the small arrangement of the lease of counterattack crusher. The above content comes from the network. If you have different opinions, welcome you to our official website: http://www.danricelaw.com! Leave us a comment and we will give you a regular reply!