There are many requirements for the installation of crusher, especially for the treatment of base. In this regard, the mobile gravel rental manufacturer reminds us that the crusher should be installed on a solid foundation deep into hard soil. The size and structure of the base shall conform to the round paper of the manufacturer and shall be determined according to the needle setting.
The upper part of the foundation should be solid and horizontal. The latter condition is particularly important for the crusher with water seal.
For the individual bearings of the transmission device, the foundation should be a common foundation with the foundation of the whole machine to prevent the shaft drinks from deflecting the transmission device. In order not to deflect the whole machine, the common center of gravity of the foundation and the machine should be vertically connected through the center of gravity of the foundation area.
Bridge cranes or other lifting equipment should be installed on the upper part of the crusher to lift parts during installation and repair.
Before installing the crusher, it is necessary to check whether all parts and parts are sufficient. Before installation, dust and sand should be removed from each part and each part; oil pipes and pipes should be inspected and cleaned; and all machined surfaces and threads should be inspected. Examine the installation sequence of coarse crushing circular cone crusher and medium crushing and fine crushing cone crusher.
Thank you for your reading and watching. The wonderful content of this article comes from: mobile gravel rental manufacturers, we will have more wonderful content to continue to show you. For more details, please click: http://www.danricelaw.com.